If you have a straight-stitch-only machine, set the stitch length to a medium (2.5 mm to 3.0 mm) setting. When sewing knits with a straight stitch, stretch the fabric slightly (and gently) as it goes under the presser foot. To do this, apply equal pressure on both sides of the needle by slightly pulling the fabric.
What stitch do I use to sew knit fabric?
A zigzag stitch is a great way to seam knit fabrics. Its inherent stretch allows for the fabric to stretch and move without fear of popping a seam. On light to medium weight knits, try using a stitch length of 1.5 and a width of 5. This setting closely mimics the look and function of an overlock stitch.
Can I use straight stitch on stretchy fabric?
The Best Stretch Stitches & Sewing Machine Settings for Stretchy Fabrics. Use stitches that will hold the stretch of the fabric. The stitches need to stretch with the fabric, so they don’t pucker and break. If you must sew with a straight stitch, then hold the material taut, but don’t pull it.
Can you sew knits with a regular sewing machine?
Your regular, conventional sewing machine has a lot of uses when sewing with knits. … You can also use a conventional machine to sew a hem using a zigzag stitch or using a twin needle to do a mock coverstitch. Any topstitching on a knit fabric is best done on a conventional machine.
What thread do I use for stretchy fabric?
The most common threads used to sew stretch knit fabrics are textured polyester or textured nylon threads like A&E’s Wildcat® Plus or Best Stretch®. Textured threads are ideal for overedge and coverstitch seams because they offer excellent seam coverage and seam elasticity.
What is the best stitch for hemming?
Twin needle hems are especially effective on knit fabrics as it will flex with the fabric. 1. Use a serger or an overcast stitch to sew a finished edge on the raw edge to be hemmed.
Can you do a zig-zag stitch with a walking foot?
Yes, you can use your walking foot for more than straight stitching. A zig-zag stitch should be just fine because all the movement in the stitch pattern is forward. In fact many of the decorative stitches on your sewing machine are just fine to use with your even feed foot installed.
What tension should I use for cotton?
Cotton requires a moderate tension setting, usually between three and four. Always start adjusting your tension settings with your upper tension.